Spray Measurement

Electronic switching box to synchronise mains-operated external devices such as extraction and vacuum pump systems with the Spraytec measurement.

Set of 2 trigger cables for the input and output triggers on the Spraytec system. These allow users to connect external devices to the Spraytec in order to synchronise other events with the Spraytec measurements. Provides a BNC connector for each trigger.

Additional 300mm lens, enabling measurements to be made from 0.1-900 microns (Dv50: 0.5 - 600 microns)

Additional 750mm lens, enabling measurements to be made from 2-2000 microns (Dv50: 5 - 1600 microns)

Spraytec extraction system for the extraction of low volume sprays such as domestic aerosols, nasal sprays and personal products. Includes spray collector assembly, tubing, HEPA filter unit and a switching box to synchronise operation with the Spraytec measurement. (110V variant)

Spraytec extraction system for the extraction of low volume sprays such as domestic aerosols, nasal sprays and personal products. Includes spray collector assembly, tubing, HEPA filter unit and a switching box to synchronise operation with the Spraytec measurement. (240V variant)

Aerosol Mounting Unit for reproducible positioning of an spray can relative to the Spraytec measurement zone. Designed to allow for the use of both horizontally-firing and vertically-firing spray cans. Provides a maximum distance of 200mm between the spray nozzle and the Spraytec measurement zone.

Wet sample dispersion unit for the Spraytec system. This unit has a freestanding 50 to 120ml stainless steel tank for the dispersion of particles in liquids. Control of an in-line pump and stirrer is performed via a separate tacho controller which controls and displays the pump/stir speed. Filling and draining are manual operations. The package includes a flow cell. Solvent Resistance Code:B