Set of 25 flat sample holders for powders with a volume of 15 x 20 x 2mm
Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO
The Malvern Panalytical Powder Sample Preparation Kit, is an aid for the back loading of powders into the 9430 018 11161 and the 9430 018 11271 sample holders. The 9430 017 70101 holds the sample holder ring firmly during loading. The kit is comprised of a sample preparation table (onto which the sample holder ring is clamped), a powder press block or piston, a dusting brush and a Stanley knife blade.
Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO | Aeris
Set of bottom plates (3 pieces) for sample holder rings 9430 018 11161 and 9430 018 11271.
Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO | Aeris
The Malvern Panalytical 16mm Sample Insert, is a set of 3 holders used for the back-loading or front-loading of powder specimens, either manually or semi-automatically. This ring-shaped holder needs to be supported by the bottom plate, 9430 018 11001. The internal diameter of the ring is 16mm and the thickness is 2.4mm. Supports scans starting at 0 degrees 2theta.
Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO | Aeris
The Malvern Panalytical 27mm Sample Insert, is a set of 3 holders used for the back-loading or front-loading of powder specimens, either manually or semi-automatically. This ring-shaped holder needs to be supported by the bottom plate, 9430 018 11001. The internal diameter of the ring is 27mm and the thickness is 2.4mm. Supports scans starting at 0 degrees 2theta.
Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO | Aeris
The Malvern Panalytical 46mm Sample Holder, is a set of 3 holders for the front-loading of solid samples. The internal diameter of the holder is 44mm and the maximum thickness is 6.5mm. Supports scans starting at 0 degrees 2theta.
Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO | Aeris
25 steel ring sample holders, for use with (semi-)automatic hydraulic sample press with 35 mm diameter piston. The powder is pressed directly in the ring. Supports scans starting at 0 degrees 2theta.
Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO | Aeris | Zetium | Axios Fast | Axios (mAX, 1kW) | Magix (PRO) | Epsilon 4 | Epsilon 1 | Epsilon 3 (X, XL, XLE) | MiniPal (2, 4, QC) | Epsilon 5 | PW24XX | PW26XX
Set of 3 sample holders for samples on substrates, pressed pellets and plate filters. Inner diameter is 26 mm. For filters or solid samples of 24 to 26 mm (1 inch) diameter, maximum thickness 5.8 mm. Includes support plate and spring. Supports scans starting at about 3 degrees 2theta.
Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO | Aeris
Set of 3 sample holders for samples on substrates, pressed pellets and plate filters. Inner diameter is 40 mm. For filters or solid samples of 37.5 to 40 mm (1 inch) diameter, maximum thickness 5.8 mm. Includes support plate and spring. Supports scans starting at about 3 degrees 2theta.
Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO | Aeris
The Malvern Panalytical 32mm Low Angle Sample Holder, is a set of 3 sample holders for 32mm pellets, silicon plate, or the 9430 018 16321, ceramic filter plate. The maximum diameter of the sample on a filter plate is 29mm, with a thickness of between 0.4 and 0.5mm. Supports scans starting at zero degrees 2theta.
Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO | Aeris
