View Basket
0 items 0.00

If your country is not listed below, please visit MalvernPanalytical.com for details of the sales contact in your country.

Americas

Europe

Calibration Sets

View As :

or Register to view prices and add items to your basket

Showing 1 to 10 of 23 products

OMNIAN SW LTU

Product Number : 9430 042 52921

A single calibration program, set up with the Omnian setup samples, is used to quantify the complete composition of almost any type of material. Important functions include an accurate Peak Search <(>&<)> Match algorithm, an advanced Fundamental Parameter algorithm that corrects for the Fluorescent Volume Geometry (FVG) and the unmeasured 'Dark Matrix' compounds, and Adaptive Sample Characterization (ASC) to correct for sample-specific effects.

or Register to view prices and add items to your basket

Compatible with: Zetium | Axios (mAX, 1kW)

TOXEL STANDARDS BASIC

Product Number : 9430 043 30001

Set of 4 standards and one blank (2 replicates of each standard/blank) for analysis of toxic elements in polymers covering the following elements and concentration ranges: ·   Cr (0 to 24.8 ppm) ·   Cd (0 to 24.8 ppm) ·   Hg (0 to 5.3 ppm) ·   Pb (0 to 22.3 ppm) ·   As (0 to 0 to 6.4 ppm) ·   Ni (0 to 10.6 ppm) ·   Cu ( 0 to 25.1 ppm) ·   Zn (0 to 5.1 ppm) ·   Ba ( 0 to 600.7 ppm) ·   Br (0 to 163.3 ppm)

or Register to view prices and add items to your basket

Compatible with: Zetium | Axios (mAX, 1kW) | Magix (PRO) | Epsilon 4 | PW24XX | PW26XX

ADPOL STANDARDS BASIC

Product Number : 9430 043 31001

Set of 4 standards and one blank (2 replicates of each standard/blank) for analysis of additive elements in polymers. The standards contain certified concentrations of additive elements: ·   F (0-266ppm) ·   Na (0-189ppm) ·   Mg (0-561ppm) ·   Al (0-385ppm) ·   Si (0-778ppm) ·   P (0-94ppm) ·   S (0-98ppm) ·   Ca (0-200ppm) ·   Ti (0-112ppm) ·   Zn (0-198ppm)

or Register to view prices and add items to your basket

Compatible with: Zetium | Axios (mAX, 1kW) | Magix (PRO) | Epsilon 4 | PW24XX | PW26XX

ROHS CAL STANDARD BASIC

Product Number : 9430 043 32001

The ROHS calibration standards in polyethylene designed for meeting the compliance requirements of the ROHS/WEEE and ELV as similar regulations. The set consists of 4 standard disks and one blank. The set comes with 2 replicates of each standard to asset in meeting infinite thickness requirements as well as providing additional standards in case some wear out due to normal use. The standards not only cover the main restricted elements of Br, Cd, Pb, Cr and Hg, but also contain commonly monitored elements such as As, Cl, S, Sb, Sn and Zn. The concentration ranges of the set are as follows: As(0-145ppm),Br(0-980ppm), Cl(0-1075ppm), Cd(0-252ppm), S(0-590ppm), Pb(0-1033ppm), Cr(0-973ppm), Sb(0-345ppm), Hg(0-483ppm), Sn(0-178ppm), Zn(0-976ppm).

or Register to view prices and add items to your basket

Compatible with: Zetium | Axios (mAX, 1kW) | Magix (PRO) | Epsilon 4 | PW24XX | PW26XX

CEMOXI SETUP SAMPLES

Product Number : 9430 043 60001

CEMOXI is a set of synthetic standards that will handle fused bead major element analysis of cement final product and cement raw materials. CEMOXI can be used as a primary fused bead calibration or to verify customer in-house standards for pressed powder applications. The PANalytical Axios spectrometer coupled with the CEMOXI standards and the SuperQ software FP algorithm makes up a unique system that consistently produces very high quality major and minor element analyses in a wide variety of cements and the raw materials used in its manufacture, including limestone, clay/shale and gypsum. The CEMOXI standards set comprise nine multi-element synthetic “cement” standards. The standards are delivered as powders to be prepared as fused beads by the customer, using the customer’s flux, dilution ratios and methodology. The standard CEMOXI-00 should be a fused bead of the customer’s own flux. They are therefore suited and applicable to every cement industry laboratory. It is recommended to fuse the standards in duplicate and in separate fusion batches. CEMOXI oxides and their concentration ranges (wt%) Na2O , 0 – 1.0 , MgO , 0 – 6.0 , Al2O3 , 0 – 10 , SiO2 , 0 – 24 , P2O5 , 0 – 0.5 , SO3 , 0 – 59 , K2O , 0 – 2.0 , CaO , 0 – 70 , TiO2 , 0 – 1.0 , Mn2O3 , 0 – 0.28 , Fe2O3 , 0 – 7.0 , ZnO , 0 – 0.25 , SrO , 0 – 0.7

or Register to view prices and add items to your basket

Compatible with: Zetium | Axios (mAX, 1kW) | Magix (PRO) | Epsilon 4 | PW24XX | PW26XX

WROXI SETUP SAMPLES

Product Number : 9430 043 63001

WROXI is a set of synthetic standards that will handle fused bead major element analysis of many of the elements required by the mining and mineral industries. WROXI can be used as a primary fused bead calibration or to verify customer in-house standards for pressed powder applications. The PANalytical sequential range of spectrometers combined with WROXI standards and the SuperQ software FP algorithm makes up a unique system that consistently produces very high quality major and minor element analyses in a wide variety of raw materials from many different industries, including cement, gypsum, ceramics, bricks, glass, iron and manganese and some heavy mineral ores. The WROXI standards set comprises twenty multi-element synthetic standards. The standards are delivered as powders to be prepared as fused beads by the customer, using the customer’s flux, dilution ratios and methodology. The standard WROXI-00 should be a fused bead of the customer’s own flux. They are therefore suited and applicable to every relevant industry laboratory. WROXI oxides and their concentration ranges (wt%) Na2O 0-58, MgO 0-78, Al2O3 0-78, SiO2 0-80, P2O5 0-40, SO3 0-59, K2O 0-40, CaO 0-80, TiO2 0-40, V2O5 0-10, Cr2O3 0-10, Mn3O4 0-80, Fe2O3 0-82, NiO 0-12, CuO 0-8, ZnO 0-10, SrO 0-20, ZrO2 0-43, BaO 0-43, HfO2 0-10, PbO 0-10

or Register to view prices and add items to your basket

Compatible with: Zetium | Axios (mAX, 1kW) | Magix (PRO) | Epsilon 4 | PW24XX | PW26XX

OIL-TRACE SETUP SAMPLES

Product Number : 9430 043 66001

The Oil-Trace set up samples consist of 6 blank matrix samples designed to be used in conjunction with the Oil-Trace software package to correct for varying CH content in unknown samples. The set up sample suite includes butanol, dibutyl ether, ethanol, glycol, IPA and mineral oil.

or Register to view prices and add items to your basket

Compatible with: Floorstanding XRF | Zetium | Axios (mAX, 1kW)

NIFECO SETUP SAMPLES

Product Number : 9430 043 67001

The set of 6 NiFeCo-FP set-up samples is used to transfer the NiFeCo-FP master calibration for up to 21 elements in nickel-, iron- and cobalt-based alloys. This master calibration is based on more than 120 certified reference materials and includes special elements like Pt, Re, Ta and Hf. A drift correction monitor sample and quality check sample are included. The SuperQ Metals Database includes application templates for NiFeCo-FP and other metals applications. SuperQ and all licensed customer options will be updated. NOTE: this module requires SuperQ version 4 or higher.

or Register to view prices and add items to your basket

Compatible with: Zetium | Axios (mAX, 1kW) | Magix (PRO) | PW24XX | PW26XX

CU-BASE SET-UP SAMPLES

Product Number : 9430 043 68001

The Cu-Base pre-calibration covers the analysis of 17 elements in Cu-based alloys, including: ·    bronze ·    Al-bronze ·    P-bronze ·    Pb-bronze ·    brass ·    alloyed brass ·    Pb-brass The pre-calibration is performed in the factory before shipment and the samples used to calibrate the system are delivered with the system.

or Register to view prices and add items to your basket

Compatible with: Zetium | Axios (mAX, 1kW) | Magix (PRO) | PW24XX | PW26XX

WEAR METAL CAL SET

Product Number : 9430 043 73111

The wear metals calibration set includes 17 standards packaged in 50ml bottles for the analysis of 22 elements including: ·   Ag ( 0 – 500 ppm) ·   Al ( 0 – 2000 ppm) ·   Ba ( 0 – 2000 ppm) ·   Ca ( 0 – 5000 ppm) ·   Cd ( 0 – 500 ppm) ·   Cr ( 0 – 500 ppm) ·   Cu ( 0 – 400 ppm) ·   Fe ( 0 – 500 ppm) ·   K ( 0 – 500 ppm) ·   Mg ( 0 – 3000 ppm) ·   Mn ( 0 – 500 ppm) ·   Mo ( 0 – 500 ppm) ·   Na ( 0 – 500 ppm) ·   Ni ( 0 – 500 ppm) ·   P ( 0 – 2000 ppm) ·   Pb ( 0 – 500 ppm) ·   Sb ( 0 – 500 ppm) ·   Si ( 0 – 500 ppm) ·   Sn ( 0 – 500 ppm) ·   Ti ( 0 – 500 ppm) ·   V ( 0 – 500 ppm) ·   Zn ( 0 – 2000 ppm). The calibration set is also packaged with a performance testing sample for verifying the calibration.

or Register to view prices and add items to your basket

Compatible with: Zetium | Axios (mAX, 1kW) | Magix (PRO) | Epsilon 4 | PW24XX | PW26XX