View Basket
0 items 0.00

If your country is not listed below, please visit MalvernPanalytical.com for details of the sales contact in your country.

Americas

Europe

Rheology Instruments

View As :

or Register to view prices and add items to your basket

Showing 101 to 110 of 127 products

Kinexus Tribology Cell - 3 Point Ball

Product Number : KNX2281

The Kinexus tribology geometry introduces the ability to measure friction under increasing applied force. Removable plate inserts make it possible to measure the wear of different materials with different samples.

or Register to view prices and add items to your basket

Compatible with: Kinexus lab+ | Kinexus ultra+ | Kinexus pro+

KNX Texture Analysis–3 Point Bend Kit Al

Product Number : KNX2292

The texture analysis 3 point bend system is designed to allow measurement of your samples using the Kinexus’ axial capabilities. Capturing the force to failure, enabling direct comparisons of sample’s brittleness and strength. Requires KNX0095 Universal Upper Geometry (M4) to connect the probe, and either KNX0149 or KNX2277 Universal Container Holders to hold the lower (sold separately).

or Register to view prices and add items to your basket

Compatible with: Kinexus lab+ | Kinexus ultra+ | Kinexus pro+

Cell for Dielectric Sensor

Product Number : KNX2326

Lower plate (for Active Hood cartridge) designed to support an implantable dielectric sensor type. Implantable sensors are designed for one-time use and are compatible with Kinexus disposable plates enabling the sensor to be positioned in the test sample.

or Register to view prices and add items to your basket

Compatible with: Kinexus lab+ | Kinexus ultra+ | Kinexus pro+

Kinexus Immersion Cell

Product Number : KNX2333

The Kinexus immersion cell is designed to prevent samples from drying out during measurement. Samples (such as hydrogels) are immersed in a liquid and therefore with a hydrated environment allows measurements to be conducted without drying influencing the results.

or Register to view prices and add items to your basket

Compatible with: Kinexus lab+ | Kinexus ultra+ | Kinexus pro+

Kinexus Dispersion Paddle

Product Number : KNX2334

The Kinexus dispersion paddle can be used for those materials that are rapidly settling / sedimenting. Designed to be used with a lower C34 cup, the nature of the paddle will prevent particles within the system from settling, allowing the bulk viscosity of the samples to be measured.

or Register to view prices and add items to your basket

Compatible with: Kinexus lab+ | Kinexus ultra+ | Kinexus pro+

Mooney Ewart 0.5ml cup and bob set

Product Number : KNX2507

A small sample volume (0.5 - 1.0ml) cup and 25mm diameter bob system, designed to provide uniform shear rate in the gap and at lower (cone) face of bob. Quick-connect engagement mechanism and auto-recognition and configuration.

or Register to view prices and add items to your basket

Compatible with: Kinexus lab+ | Kinexus ultra+ | Kinexus pro+ | Kinexus DSR | Kinexus DSR+

Kinexus passive solvent trap cover

Product Number : KNX2513

For Standard Plate and Cylinder Cartridges ONLY and requires a lower plate with solvent trap feature(s). Designed for minimizing volatile solvent loss from samples during measurements when using the standard Plate and Cylinder cartridges. Includes: Stainless Steel upper solvent reservoir, Stainless Steel Thermal cover system, reservoir positioning tool, and purge gas kit. Upper geometry diameter range for use with passive solvent trap cover is 4mm - 60mm. Recommended temperature range for use is from -40 to 200°C.

or Register to view prices and add items to your basket

Compatible with: Kinexus lab+ | Kinexus ultra+ | Kinexus pro+ | Kinexus DSR | Kinexus DSR+

Temperature Calibration Kit - Multimeter

Product Number : KNX4033

For Automated Temperature Calibration for Kinexus (Temp range -40 - 100°C) Comprises: Fluke Meter, USB interface, DSR Probe, Thermal paste, Case

or Register to view prices and add items to your basket

Compatible with: Kinexus lab+ | Kinexus ultra+ | Kinexus pro+ | Kinexus DSR | Kinexus DSR+

DuNouy ring interfacial geometry-Kinexus

Product Number : KNX4041

For measurement of a material's interfacial rheological properties. Includes a 20mm diameter DuNouy ring, a zero gap tool and adapter spacer. Recommended to be used with KNX0134 Cup 37mm. Requires KNX2174 custom geometry adapter.

or Register to view prices and add items to your basket

Compatible with: Kinexus lab+ | Kinexus ultra+ | Kinexus pro+ | Kinexus DSR | Kinexus DSR+