View Basket
0 items 0.00

If your country is not listed below, please visit MalvernPanalytical.com for details of the sales contact in your country.

Americas

Europe

XRD Range

View As :

or Register to view prices and add items to your basket

Showing 21 to 30 of 142 products

SAMPLEHOLD 40MM FILT 3X

Product Number : 9430 018 13401

Set of 3 sample holders for samples on substrates, pressed pellets and plate filters. Inner diameter is 40 mm. For filters or solid samples of 37.5 to 40 mm (1 inch) diameter, maximum thickness 5.8 mm. Includes support plate and spring. Supports scans starting at about 3 degrees 2theta.

or Register to view prices and add items to your basket

Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO | Aeris

SAMPLEHOLD 32MM 3X

Product Number : 9430 018 14321

The Malvern Panalytical 32mm Low Angle Sample Holder, is a set of 3 sample holders for 32mm pellets, silicon plate, or the 9430 018 16321, ceramic filter plate. The maximum diameter of the sample on a filter plate is 29mm, with a thickness of between 0.4 and 0.5mm. Supports scans starting at zero degrees 2theta.

or Register to view prices and add items to your basket

Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO | Aeris

INSERT AIR SENS.SAMPLES

Product Number : 9430 018 15401

These inserts are designed for use with the 9430 018 13401 sample holder. The sample cavity is large enough to use a 9430 018 17321 Zero-background holder when only a small amount of material is available. To be completed with thin X-ray transparent foils such as 7.5micron Kapton (9430 500 21011).

or Register to view prices and add items to your basket

Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO | Aeris

SI SUBSTR 32 MM (2X)

Product Number : 9430 018 17321

The Malvern Panalytical 32 mm Low background Insert, is a set of 2 silicon single crystal substrates, which are used for measurements of small amounts of sample material that require low background intensity. The diameter is 32 mm and the thickness is 2 mm. One side of the substrate is flat while the other side has a recess of 15mm diameter and 0.2 mm deep. May be used with 9430 018 13321 or 9430 018 12001 sample holders.

or Register to view prices and add items to your basket

Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO | Aeris

Side-loading sample hldr

Product Number : 9430 018 18101

Set of three Sside-loading sample holder inserts for powder samples prepared using the side loading technique. To be used with 9430 018 13401 or 9430 018 12001 sample holders.

or Register to view prices and add items to your basket

Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO | Aeris

INSERT TRANSMISSION (3X)

Product Number : 9430 018 18251

Set of 3 inserts for the analysis of samples in the transmission geometry. To be used with the 9430 018 18401 sample holder. These i nserts can be used to clamp thin foils or fibers. The inner diameter of the ring is 25 mm, the maximum 2Theta angle in transmission geometry is 120 degrees (when making a symmetrical scan with the transmission spinner sample stage 9430 030 76001.). To be used in the 9430 018 18401 sample holder and the 9430 030 76001 transmission spinner stage. Can also be used (in reflection geometry) in other sample stages that accept the range of 9430 018 xxxx sample holders.

or Register to view prices and add items to your basket

Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO | Aeris

TRANSMISSION HLDR 3X

Product Number : 9430 018 18401

Set of 3 sample holders for measurement of samples in transmission geometry. Accepts inserts of 6 mm thick and 40 mm diameter, such as the 9430 018 18251.This sample holder is designed for use with the 9430 030 76001 transmission spinner or reflection/transmission spinner 9430 030 64601.

or Register to view prices and add items to your basket

Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO | Aeris

SET 15 ZB HOLDERS 25MM

Product Number : 9430 018 19251

SET 15 ZB HOLDERS 25MM

or Register to view prices and add items to your basket

Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | X'Pert3 MRD (XL), X'Pert PRO MRD (XL) | CubiX 3, PRO | Benchtop XRD | Aeris

SET 15 ZB HOLDERS 32MM

Product Number : 9430 018 19321

The Malvern Panalytical 32 mm Low background Insert, is a set of 15 silicon single crystal substrates, which are used for measurements of small amounts of sample material that require low background intensity. The diameter is 32 mm and the thickness is 2 mm. One side of the substrate is flat while the other side has a recess of 15mm diameter and 0.2 mm deep. May be used with 9430 018 13321 or 9430 018 12001 sample holders.

or Register to view prices and add items to your basket

Compatible with: Empyrean | X'Pert (3) Powder, PRO MPD | CubiX 3, PRO | Aeris