XRD Range

Compact PreFIX attachment for SAXS and WAXS measurements under low-vacuum conditions. The chamber contains advanced collimation elem ents, a capsule that accepts different types of sample holders (such as for powders, liquids and thin solid objects), a retractable semi-transparent beams top, and an interface to a low-vacuum pump system. It allows for SAXS/WAXS measurements within a wide angular range of up to 78 deg 2Theta. A low scattering background can be achieved, enabling for measurements with a good sensitivity even for weakly scattering samples. The attenuated direct beam is included in all measurements, which allows controlling its position and the attenuation by the sample.

Set of primary microbeam masks for the X-ray focusing mirrors (Co and Cu) and the X-ray parallel beam mirrors (Co and Cu). It contains three masks of different widths, 0.2 mm, 0.3 mm and 0.5 mm. The primary masks are inserted in the X-ray mirror, close to the X-ray focus. They can be used in combination with either the 9430 061 21001 Microbeam collimators or with the 9430 061 20011 secondary microbeam masks in order to create an intense microbeam with small divergence on the sample.

Set of microbeam collimators for X-ray focusing and parallel beam mirrors (Co and Cu). Three microbeam collimators are included with different openings, 0..1 mm, 0.3 mm and 0.5 mm. Combination of one microbeam collimator with one of the microbeam primary masks (9430 061 20001) inserted in the X-ray mirror create an intense microbeam with small divergence on the sample.

Mechanical interface allowing the microbeam collimators to be mounted on a parallel beam X-ray mirror (Cu or Co). The collimators are magnetically attached to the interface in a very convenient and reproducible way.

Mechanical interface allowing the microbeam collimators to be mounted on a focusing X-ray mirror (Cu or Co). The collimators are magnetically attached to the interface in a very convenient and reproducible way.

This sample holder for 0.7mm capillaries is intended for use in a sample stage for pre-aligned capillary holders.

Sample holder designed for use with powders and solids on SAXS WAXS stage

Spare parts for the system. Set of spare parts for cabinet 9430 060 03002. Version for series 2 with SBC + Nios

Six position sample changer for Aeris for 51.5 mm sample holders for sequential analysis of multiple samples.

Ceramic sample cup for the Anton Paar HTK1200N, inner diameter 16 mm, depth 0.8 mm. The sample cup can be taken from the sample holder flange and loaded in a separate location.