XRF Range

A high performance X-ray Tube with a Rhodium anode. The use of advanced ceramic engineering together with a patented filament design results in a ‘Super Sharp Tube’ (SST). The narrow tube nose profile enables ultra close anode-to-sample coupling without obstructing the optics of the spectrometer. The PANalytical patented design also features fast isowatt switching that allows for rapid adjustment to the kV and mA settings to optimize analytical conditions without any thermal shock or compromise to operating lifetime. The rugged design permits continuous full power operation. For 2.4 kW and 3 kW spectrometers.

A High performance X-ray Tube with a Rhodium anode. The use of advanced ceramic engineering together with a patented filament design results in a ‘Super Sharp Tube’ (SST). The narrow tube nose profile enables ultra close anode-to-sample coupling without obstructing the optics of the spectrometer. The PANalytical patented design also features fast isowatt switching that allows for rapid adjustment to the kV and mA settings to optimize analytical conditions without any thermal shock or compromise to operating lifetime. The maximum power rating of the tube is 4kW with operation up to 60 kV and 125mA. The rugged design permits continuous full power operation.

X-RAYFILM POLYESTERPETP

Ultra-wax binder. Description: High efficiency micronized binder for preparation of pressed pellets. This novel premium product has some very attractive characteristics, rendering it superior to traditional binder materials in many aspects: 

·   Small particle size (micronized powder): d50≅9 μm, resulting in better homogenization and coating of analyte particles, requiring use of less binder 

·   Excellent binding properties, allowing preparation of stable pellets of even tricky materials like SiO2, TiO2 or carbon, with lower dilutions. 

·   Low mass attenuation coefficient, as it is composed of only CH2 units resulting in less analyte signal loss to absorption, while still keeping a low scattering profile, and allowing measurement of nitrogen and oxygen. 

·   Very clean, presenting < 10 ppm Mg and Si, < 20 ppm Cl and C and around 50 ppm Al. 

·   Lower density than typical wax binding agents which together with a smaller particle size results in more particles present in the same amount, leading to more stable pellets while requiring less binder 

·   Excellent resistance to heat and radiation damage and no affinity towards moisture, guaranteeing stable and robust pellets with long shelf lives. 

·   Not hazardous, not toxic, not flammable, chemically inert and with no transport restrictions. 

Comes in a quantity of 5kg.